Repair Services for Industrial and Commercial Customers
Bristol Saybrook
Repair Bristol Saybrook motor
I have a Bristol Saybrook electric motor that is used for a case annealer for rifle cartridges. The model is 447, 511D-W, 81k, 4 RPM, 120 v, 60 Hz, 4 W. The motor works however when load is put onto the motor it stops rotating the cartridge holder. The spindle on the motor goes into a drive drum about 1.25 inches in diameter and an o-ring is on the drum which drives the cartridge holder by tension put on the two parts from a spring. I do not have the name of the case annealer. Can you tell me if you can repair the motor or if you have a replacement motor with the same specs especially the rpm and the mounting bolt location? Thank you very much.
Leighton Wong
email zat.leighton@gmail.com
phone (808)206-4653