K.E.W. Hobby pressure washer :: Industrial Electronic Repair

Links Menu

Home
About Us
Repair Lab
Job Opportunities
Manufacture's Repaired
Onsite Field Repair
Forum
Get Quote
Repair Service Form
Monitor Repair
Power Supply Repair

Get Repair Pricing


Manufacture:

Part #:



Contact Menu

Email Sales
Email Shop
Email Parts
Contact Info
1-336-969-0110

  
K.E.W. Hobby pressure washer

  Posted by Tom Hamilton on Wednesday, December 16 2009

I may have the same pressure washer you have. My pressure gauge shows two circular pressure scales. The outer scale is from 0 to 150 with a heavy mark at the 50 digit and 100 digit. At the bottom it says "BAR". If your information plate says 62 BAR as mine does then acceptable pressure is between 50 and 100 BAR. The inner scale is in PSI is shows a heavy mark at 1 and another at 2 which I take to be the normal range as well. It also says x 1000 psi. So, in my case the inner scale is in PSI. When my pressure washer is running (I'm going from memory here) it seems to put out around 1000 PSI. Also, my KEW Hobby has a way to check the oil in the compressor at the top near the gauge. I have to pry the dipstick out with my finger nail, but that's OK by me. It thankfully says "Full". On the ID plate I've got a build date of 1986/33 which I take to be the 33 week of 1986. The ID plate also says 100 BAR (which may be the maximum pressure) and a flow rate of 8.6 l/min. This was my Dad's pressure washer which I got from him. It still works after all these years although the rubber covering is peeling off the pressure hose exposing the white layer underneath. Good luck with yours.



  Current thread:

Currently there are no responces to this post.

View Parent Message

Return Home
to K.E.W.

Contact Sales


If you need your K.E.W. unit tested or repaired
then give us a call at 1-336-969-0110.
We give free estimates and offer a year warranty.


Reply to the Message Below!
OLD Topic: K.E.W. Hobby pressure washer
Your name:
Valid Email Address Required:
Your Location:
Subject:
Comment about
K.E.W.:
Solve the captcha ->
You can contact us at 1-(336)-969-0110
Recent Questions
More Repair Questions.....


A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Disclaimer: This website is not sanctioned or approved by any manufacturer listed.
"Industrial Electronic Repair" is not an authorized distributor or representative
for the listed manufacturers or tradenames.

Home
Repair Lab
Manufactures Repaired
Manufactures List
Onsite Field Repair
Forum
CNC Monitor Repair Lab
Power Supply Repair
Get Quote
Job Opportunities

Advance Industries
Ampro
Antex
Ball Electronic Monitors
Board Repair
Computer Signamation
Delta Tau
Druck DPI510 DPI520 Repair
DVE DSO-142L
Gepruft
Industrial Devices
McMartin
Mitsubishi MELSERVO-SA
Motion Science
Nikki Denso Servo Drive Repair
NSK Servo Drives
Omnitester Corp Board Repair
Panel Electronics
Procond Elettronica
Proteck
Robotool
SAFT NIFE Corp Power Supply Repair
ScanRay
Schlumberger ATE 635 S645
Techmalux
Teijin Seiki
Vickers Servo Drive Repair
Westronics
WorkHorse


Home


Hosted by

Christ Servers
Christian Web Hosting



Powered by IERNC Content Management System CMS 1.0 2006
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  
New Server